|
Fă-o singur
| |||
| ||||
Verificați eficiența bateriei și sistemul de încărcare.
Model: Renault Megane
Megane 1
- Ani 1995-2003
Once the battery's position has been identified, which in the case of the car in question is located on the passenger side, just below the windshield, check that the terminals are tightly secured and do not show any signs of oxide or corrosion; also check that the battery does not have any acid leaks. The first measurement of the battery's charge status must be done with the engine off and the ignition on (the battery light must turn off); place the multimeter on the 20V direct current scale, and connect the probes to the battery terminals respecting the polarity: an efficient battery should give a voltage value between 12.3V and 13.5V.
Check the voltage drop during the starting phase to test the battery's starting power: it should not drop below 8V. Then proceed to check the charging system, making sure that the auxiliary belt that drives the alternator pulley is intact and does not have any cracks; start the engine, make sure the battery light turns off, and measure the voltage at the battery terminals: it should have a value between 13.2V and 14.8V. Finally, to check the stability of the alternator regulator, activate all electrical devices (lights, turn signals, defroster, cabin fan) and check that the voltage does not drop below 13.2V (it may be necessary to accelerate a bit).
Introdus la 10 June 2016 by ScegliAuto
Acest videoclip nu este disponibil momentan
Tutoriale conexe
Renault Megane
(1995-2003 /
Megane 1)
The air mass meter or flow meter has the function of measuring the volume of air sucked in by the engine, based on which the engine management contro…
Renault Megane
(2002-2010 /
Megane 2)
În acest videoclip putem vedea schema de siguranțe pentru Renault Megane 2, util în cazul în care unul dintre dispozitivele diferite prezintă semne d…
Renault Megane
(1995-2003 /
Megane 1)
The first thing to check to verify the correct functioning of the preheating system is that the glow plugs are being powered by the corresponding rel…
Alte ghiduri care te-ar putea interesa
|
Cum să verifici nivelul uleiului de motor al unei Volvo V40.
În acest videoclip vedem cum să verificăm nivelul de ulei al unei Volvo V40: de fapt, aceste vehicule nu au bățul de măsurare a nivelului, așa că nivelul trebuie verificat de pe tabloul de bord. Pornim apoi contactul și apăsăm butonul "ok" care se află pe maneta de semnalizare din stânga volanului. Lângă acesta găsim un buton rotativ cu care navigăm prin diferite opțiuni până când ajungem la desenul sticlei de ulei. Apăsând "ok", vedem nivelul de ulei. Amintim că procedura trebuie făcută absolut cu mașina în plan, toate ușile, capota, portbagajul închise și mașina oprită și oprită de cel puțin 5 minute. by ScegliAuto Alte videoclipuri
|
|
Pentru publicitatea pe acest site Scrie la info@scegliauto.com
ScegliAuto nu este responsabil pentru eventualele inexactități ale datelor din listă. Pentru a semnala o posibilă inexactitate sau activitatea dvs. (dacă sunteți titularul activității respective), vă rugăm să scrieți la info@scegliauto.com
Numărul de secunde necesare pentru generarea paginii: 0.161
(c) ScegliAuto 2026 - info@scegliauto.com - Politica de confidențialitate Cod TVA: IT01247470535 |