|
Fă-o singur
| |||
| ||||
|
The AIRBAG container is attached to the steering wheel through springs: in order to remove it, you need to try to release the springs. Behind the wheel, at the spokes, there are access holes to the airbag fastening springs: you need to try to hook the springs and press them towards the center of the wheel to release them. To do this, it is suggested to bend the tip of a fixed screwdriver by 90° for about 5 cm so that it can be inserted into the hole and pressed towards the center to release the spring; furthermore, once one spring is released, place a contrasting screwdriver between the AIRBAG and the wheel to prevent it from reattaching while trying to release the other spring. Once both springs are released, pull the AIRBAG to extract it from its housing and disconnect the steering wheel control connections to completely remove it. To remove the steering wheel, release the steering lock, unscrew the fixing pin, return the wheel to the center position and remove it. Finally, to remove the CIM (Column IntEGRated Module), release the frame of the leather cover located just behind the module and pull it forward to release it from the steering column; then disconnect the connected socket and secure the opposing ring with adhesive tape to prevent accidental rotations that could damage it. It is also possible to release the control levers.
Introdus la 6 September 2017 by ScegliAuto
Tutorial video
Tutoriale conexe
Saab 9 3
(2002-2014 /
MK 2)
La primă operație de efectuat este aceea de a regla volanul complet în jos și în exterior pentru a ușura operațiile de demontare. Dezactivați apoi ai…
Saab 9 3
(2002-2014 /
MK 2)
Pentru a demonta grupul de semnalizare sau modulul CIM (Modul de Integrare a Şasiului), trebuie să demontați volanul. Prima, trebuie să deblocați air…
Saab 9 3
(2002-2014 /
MK 2)
În acest tutorial este explicată funcționarea mecanismului mânerului de deschidere a ușii din spate a unui Saab 9-3. Diferitele etape permit demontar…
Alte ghiduri care te-ar putea interesa
|
Cum să înlocuiți bateria telecomenzii Volvo XC40?
În acest tutorial putem vedea cum să înlocuim bateria telecomenzii Volvo XC40, o operațiune extrem de simplă și rapidă. Pentru a face acest lucru, avem nevoie de o baterie de rezervă de tip CR2032 și, eventual, un mic șurubelniță cu vârful plat. În primul rând, îndepărtăm capacul frontal acționând butonul situat pe inelul metalic, apoi identificăm al doilea buton, îl acționăm și îndepărtăm capacul opus. Apoi deschidem capacul circular, scoatem bateria veche și introducem cea de rezervă în sens opus. În final, reasamblăm totul. by ScegliAuto Alte videoclipuri
|
|
Pentru publicitatea pe acest site Scrie la info@scegliauto.com
ScegliAuto nu este responsabil pentru eventualele inexactități ale datelor din listă. Pentru a semnala o posibilă inexactitate sau activitatea dvs. (dacă sunteți titularul activității respective), vă rugăm să scrieți la info@scegliauto.com
Numărul de secunde necesare pentru generarea paginii: 0.038
(c) ScegliAuto 2026 - info@scegliauto.com - Politica de confidențialitate Cod TVA: IT01247470535 |