Fă-o singur
Întrebări frecvente despre mașini și motociclete

Cum să demontați butonul de închidere centralizată de pe ușa șoferului de la Volkswagen Touareg 2014.

Model: Volkswagen Touareg MK 2, 7P - Ani: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Parte: Panou ușă

Vezi alte generații:
Tutorial video

The guide shows how to disassemble the driver's door panel of the 2014 Volkswagen Touareg to replace the door lock buttons. The first step is to unscrew the screws located at the bottom of the panel, under the armrest, under the upper shell, and under the handle cover.

In the last two positions, it is necessary to use a plastic lever to avoid damaging the trims. All these screws are Torx model.

At this point, after disconnecting the electrical cables, it is possible to pull the door panel to disengage it from the retaining clips. Be careful not to pull the panel too hard or you could damage the main electrical cables and the lock cable.

At this point, the control cable for the lock button is blue; disconnect it using the tab. Use a flathead screwdriver to lever the sides of the component to disassemble it; replace the button with a new one and reconnect the cable. By following the previous steps in reverse, it is possible to reassemble the panel and components.

At this point, the replacement is complete.


Introdus la 4 July 2021 by ScegliAuto


Tutoriale conexe

Volkswagen Touareg (2002-2010 / 7L, MK 1) Cum să demontați încuietoarea centralizată (partea stângă) de pe o Volkswagen Touareg? Înainte de a începe, deconectați clemele bateriei din comparti…
Volkswagen Touareg (2002-2010 / 7L, MK 1) The guide shows how to disassemble the driver's door panel of the Volkswagen Touareg. From the door handle compartment, unscrew the two Torx screws; …
Volkswagen Touareg (2002-2010 / 7L, MK 1) Cum se demontează sistemul de închidere centralizată de pe o mașină VW Touareg? Înainte de a începe demontarea, deconectăm bornele bateriei din compa…

Cum să activezi închiderea și deschiderea automată a oglinzilor retrovizoare la Jeep Compass.

Să vedem pe scurt instrucțiunile care ne vor permite să activăm închiderea și deschiderea automată a oglinzilor retrovizoare exterioare ale Jeep Compass. În primul rând, urcăm în mașină și pornim bordul; apoi apăsăm butonul pe care îl găsim sub reglarea geamului oglinzii, pentru a deschide electric oglinda, așa cum este ilustrat în videoclip. Apăsând butonul în direcția opusă, vom închide oglinzile; lăsând butonul activat, oglinzile se vor deschide și se vor închide complet automat!

Uită-te la videoclip!


by ScegliAuto

Alte videoclipuri