|
Fă-o singur
| |||
| ||||
Înlocuirea completă a parbrizului.
Model: Volkswagen New Beetle
MK 3
- Ani:
2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Tutorial video
Replacing the windshield is a delicate and dangerous operation. To prevent accidental glass breakage during removal, it is advisable to protect the interior of the car with covers to prevent glass shards from spreading and entering the ventilation system. It is also recommended to use appropriate hand and eye protection. Start by lowering the front windows, then use a sturdy plastic tool to remove the seal and moldings around the glass. Open the hood and remove the windshield wiper mechanism. Unscrew the fastening screws of the air intake grille and remove it, also disconnecting the fan motor connector. Remove the covers of the two pillars by manipulating the hidden screws behind the plastic caps. Also protect the engine air intakes and continue by lifting the windshield to remove it. It is advisable to use suction cups for this operation. Clean the edge thoroughly with a tool to remove any residue from the old seal. Apply the appropriate sealant to the edge of the new glass that you will position on the car using the suction cups. Place the appropriate spacers along the edge of the glass to position it correctly. Finish the sealing. Reinstall the camera and finish with the moldings.
Introdus la 14 November 2014 by ScegliAuto
Tutoriale conexe
Volkswagen New Beetle
(1999-2012 /
9C, MK 2)
Removeți protecția de plastică superioară centrală amplasată în apropierea parbrizului, în spatele bordului central. Pentru a face acest lucru, trebu…
Volkswagen New Beetle
(1999-2012 /
9C, MK 2)
În următorul videoclip vom vedea înlocuirea termostatului pe un Volkswagen New Beetle. Îndepărtăm panoul care acoperă motorul, scoatem colectorul de …
Volkswagen New Beetle
(1999-2012 /
9C, MK 2)
The cabin air filter is located in the center of the dashboard, just below the windshield, in correspondence with the center console: unscrew the thr…
Alte ghiduri care te-ar putea interesa
|
Cum să activezi închiderea și deschiderea automată a oglinzilor retrovizoare la Jeep Compass.
Să vedem pe scurt instrucțiunile care ne vor permite să activăm închiderea și deschiderea automată a oglinzilor retrovizoare exterioare ale Jeep Compass. În primul rând, urcăm în mașină și pornim bordul; apoi apăsăm butonul pe care îl găsim sub reglarea geamului oglinzii, pentru a deschide electric oglinda, așa cum este ilustrat în videoclip. Apăsând butonul în direcția opusă, vom închide oglinzile; lăsând butonul activat, oglinzile se vor deschide și se vor închide complet automat! by ScegliAuto Alte videoclipuri
|
|
Pentru publicitatea pe acest site Scrie la info@scegliauto.com
ScegliAuto nu este responsabil pentru eventualele inexactități ale datelor din listă. Pentru a semnala o posibilă inexactitate sau activitatea dvs. (dacă sunteți titularul activității respective), vă rugăm să scrieți la info@scegliauto.com
Numărul de secunde necesare pentru generarea paginii: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Politica de confidențialitate Cod TVA: IT01247470535 |