Montering av extra armstöd.

Make sure you have the anti-theft code for the car radio. Disconnect the negative cable from the battery.

Remove the lower center of the console. Insert your hand into the opening of the lower center cover and push on the center of the lining to unlock the three clips.

Push down on the ring to release the two fasteners. Rotate the gear lever knob counterclockwise and remove it from the gear lever.

Push down on the ring. Using a 17mm key, remove the locking nut. Using a tool to remove the shift cover (six clips and two fixing tabs).

With the parking brake engaged, move the gear lever selection to the "D" position. Remove the cup holder cover (five clips).

Attach the adhesive tape to the right side of the side console lining and the left side console lining as shown. Remove the three self-tapping screws securing the right side console lining.

Pull the console lining outward to release the four clips and four hooks. Remove the left side of the console in the same way. Locate the slot on the right side of the rear console.

Using a flat-head screwdriver wrapped in tape, lever to remove the rear console (seven screws, four clips). Be careful not to damage the center console.

Attach the armrest bracket to the vehicle bracket. Measure and cut a 10mm slot in the floor mat, aligning the armrest bracket holes with the vehicle wiring underneath.

Be careful not to damage the vehicle.