Gör det själv
Vanliga frågor om bilar och motorcyklar

Byte av bromsskivor på bilen.

Modell: Porsche 911 996 - År: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Del: Bromsskivor

Se andra generationer:
Video-handledning

The following guide provides useful instructions on how to replace brake discs. Both the braking system and the vehicle's discs are of primary importance in ensuring that the vehicle itself is operating at maximum efficiency, for the safety of both the driver and passengers.

This procedure can also be done independently without having to rely on a mechanic. First of all, the steering wheel should be turned to one side so that the brake caliper is facing towards oneself.

Lift the car with the jack and remove the wheel after removing the wheel bolts. Take a hex key and unscrew all the bolts on the rear side that hold the caliper to the frame.

Afterwards, it will be possible to remove the brake caliper. At this point, only the caliper bracket with the brake pads inside will remain.

Remove these using a suitable flathead screwdriver, being careful not to damage the disc. Then unscrew the bolts that hold the bracket firmly to the hub. Set them aside, as they will be useful for the reassembly phase.

At this point, only the brake disc will remain, which will need to be replaced.


Infogat 23 July 2018 by ScegliAuto


Relaterade handledningar

Porsche 911 (1997-2005 / 996) Den här videon visar oss hur man tar bort och byter ut bromsskivorna på vår bil. Först lyfter vi upp bilen med hjälp av en lyft och tar bort hjulen f…
Porsche 911 (1997-2005 / 996) Bromsskivor som är skadade kan påverka bromsningen, så det är bäst att byta ut dem. Ta bort bromsoket med en skiftnyckel genom att lossa de två baksi…
Porsche 911 (1997-2005 / 996) Lyft upp fordonet och demontera hjulet. Använd en speciell verktyg och hammare för att rengöra huvudet på fästskruvarna på skivan och ta sedan bort d…

Hur man aktiverar automatisk öppning och stängning av Jeep Compass backspeglar.

Låt oss kortfattat gå igenom instruktionerna som tillåter oss att aktivera automatisk öppning och stängning av Jeep Compass ytterspeglar. Först kliver vi in i fordonet och startar instrumentpanelen; sedan trycker vi på knappen som finns under spegeljusteringen för att elektriskt öppna spegeln, som visas i videon. Genom att trycka på knappen åt motsatt håll stänger vi istället speglarna; genom att hålla knappen aktiverad öppnas och stängs speglarna helt automatiskt!

Titta på videon!


by ScegliAuto

Fler videor