|
Gör det själv
| |||
| ||||
Hur man byter bromsskivan
Modell: Volkswagen Passat
3BG, B5
- År 1996-2005
Both the braking system and the vehicle's discs are of primary importance to ensure that the vehicle itself is efficient to the maximum, for the benefit of both the driver's and passengers' safety. This procedure can also be done independently and without having to rely on a trusted mechanic, you just need to possess a good amount of manual dexterity. First of all, you will need to turn the steering wheel to your side, so that the brake caliper is facing towards yourself. Lift the car with the jack and remove the wheel after removing the wheel bolts. Take a hex key and unscrew all the bolts on the rear side that hold the caliper securely to the frame. At this point, only the caliper bracket with the brake pads inside will remain. Remove the brake pads using a suitable flathead screwdriver, being careful not to damage the disc. Then unscrew the bolts that hold the bracket securely to the hub. At this point, only the brake disc will remain, which will need to be replaced.
Infogat 6 July 2018 by ScegliAuto
Video-handledning
Relaterade handledningar
Volkswagen Passat
(1996-2005 /
3BG, B5)
Lyft upp fordonet på lämpliga domkrafter för bilar och demontera de bakre hjulen. Lossa endast den nedre fästbulten för bromsoket, vrid bromsoken upp…
Volkswagen Passat
(1996-2005 /
3BG, B5)
När fordonet har lyfts upp och säkrats med speciella stödben, ta bort bakhjulen, ta bort bromsoket från dess fäste, ta bort de slitna bromsklossarna …
Volkswagen Passat
(2005-2010 /
B6, 3C)
I den här videon ser vi hur man demonterar och ersätter navlageret på framhjulet på en Volkswagen Passat B6. Först lyfter vi upp fordonet och tar bor…
Andra guider som kan vara av intresse
|
Hur reparerar man nyckelfjädern till Peugeot 207?
Tiden som går och användningen av bilnyckelns tryckknappsfunktion, tiotals gånger om dagen, leder oundvikligen till slitage på nyckelns interna fjäder. Som man kan se i den här videon är det att byta ut fjädern ganska enkelt och tar lite tid. Efter att ha öppnat skalet på mitten, placeras först nyckeln, sedan fjäderhylsan och slutligen nämnda fjäder inuti hylsan. Skalet stängs genom att rotera medurs och alla ovan nämnda element passar perfekt ihop, och man testar sedan nyckelns tryckknappsfunktion. by ScegliAuto Fler videor
|
|
För reklam på denna webbplats Skriv till info@scegliauto.com
ScegliAuto är inte ansvarig för eventuella felaktigheter i uppgifterna i listorna. För att rapportera felaktigheter eller din verksamhet (om du är ägare), vänligen skriv till info@scegliauto.com
Antal sekunder för att generera sidan: 0.133
(c) ScegliAuto 2026 - info@scegliauto.com - Sekretessinformation Momsregistreringsnummer: IT01247470535 |