Kendin yap
Araçlar ve motosikletlerle ilgili sıkça sorulan sorular

Audi TT'nin motor başlığını sökün.

Araç modeli: Audi Tt 8N, MK 1 - Yıllar 1998-2006
Bölüm: Silindir kapağı

Would you like to disassemble the engine head of an Audi TT by yourself? Let's see how to do it in this video. Pull the engine compartment opening lever located on the left bottom of the dashboard and lift the front hood, secure it. We can find the coils near the plastic engine cover. Lift the plastic clip and disconnect the power cable, grab the coil with your hands and rotate it to the right and then to the left until it comes out of the engine head, disconnect all the clamps that carry electricity to the engine glow plugs with a pliers. Unscrew the tightening bolts of the engine head, then remove the cover from the engine block. Remove the various wiring present on the engine head (disconnect the metal clamps of the various tubes and the various power clamps with pliers). Unscrew all the bolts of the engine head with a socket wrench or electric screwdriver, remove it along with the gasket.

Eklendi 4 May 2019 by ScegliAuto

Video öğretici

İlgili eğitimler

Audi Tt (1998-2006 / 8N, MK 1) Ön süspansiyonun salınım kolunu sökme işlemi için aracı özel araba krikolarına yerleştirin, ön tekerleği sökün ve direksiyon kutusunun bağlantı nokta…
Audi Tt (1998-2006 / 8N, MK 1) Audi TT'nin silecek motorunu değiştirmek için öncelikle fırçaları sabitleyen cıvataları gevşetip çıkarmak gerekmektedir. Daha sonra, camın hemen altı…
Audi Tt (1998-2006 / 8N, MK 1) Throttle body, besleme sisteminde bulunan ve karbüratöre veya enjeksiyonlu motorlarda yanma odasına girecek hava akışını düzenleyen bir mekanik bileş…

Volvo XC70'nin şanzıman yağ değişimine nasıl müdahale edilir?

Bu videoda Volvo XC70'in şanzıman yağının nasıl değiştirileceğini göreceğiz. Arabamızı bir sütun köprüsüne yerleştirip, sökme işlemi için uygun bir yükseklikte kaldıralım. Şanzıman yağının değiştirilmesi için aynı üzerinde bulunan cıvataları bir uzantılı anahtarla sökelim. (videonun talimatlarını takip edelim) Cıvataları söktükten sonra sıvıyı bir kapta boşaltalım. Şanzımana ait tüm cıvataları uzantılı anahtarla sıkıca vidalayalım, ardından şanzıman için uygun sıvıyı ekleyelim. Son olarak şanzımanın doğru şekilde çalıştığını test edelim.

Videoyu izle!


by ScegliAuto

Daha fazla video