|
Kendin yap
| |||
| ||||
Araç modeli: Beta 500rr
Beta RR500'ün motor yağı ve yağ filtresi değiştirme için açıklamalı rehber. Motul 7100 sae 10w40 1LT, Motul Transoil sae 10w40 1LT ve HIFLO HF631 yağ filtresini temin edin. Motosikleti yan sepete yerleştirin. Motoru çalıştırın, motorun sıcaklığına gelmesini bekleyin ve kapatın. Paramotorun üç vidayı 10 numaralı bir ratchet ve soketle çıkarın. Motorun altına atık yağı toplamak için bir kap yerleştirin. Motorun altında bulunan yağ tahliye tapasını 14mm bir ratchet ve soketle çıkarın. Yağı boşaltın ve tapayı temizleyin. Tahliye tapasını takın. Sağ tarafta bulunan karterin yağ dolum ağzını açın ve 850cc Motul Transoil yağı dökün. Sol ön tarafta bulunan yağ filtresi kapağının iki yan vidayı 10 numaralı bir ratchet ve soketle çıkarın. Filtre kartuşunu çıkarın ve yeniyle değiştirin. Motorun arka tarafında bulunan motor yağı tahliye tapasını 14 numaralı bir ratchet ve soketle çıkarın. Yağı boşaltın ve tapayı temizleyin. Tahliye tapasını takın. Sol tarafta bulunan motor karterinin yağ dolum ağzını açın ve 750cc Motul 7100 yağı dökün. Bir dakika çalıştırın ve kapatın. Yağ seviyesini kontrol edin.
Eklendi 23 December 2019 by ScegliAuto
Video öğretici
İlgili eğitimler
Rr 125
Beta RR 125'in motor yağının değiştirme işlemi, motosikletin alt orta kısmında bulunan tahliye tapasını gevşeterek gerçekleştirilir: bu tapa çıkarıld…
Rr 450
Bu öğreticide, Beta RR 450 enduro motosunda rutin bakım yaparak yağ ve yağ filtresi değişimi nasıl yapılacağını göreceğiz. İlk olarak, motosikletin a…
Rr 125
Beta RR 125'in motor yağını değiştirebilmek için, motosikletin alt orta kısmında bulunan tahliye tapasını gevşetmek gerekmektedir: bu tapa çıkarıldık…
|
Piaggio Si'de ayaklık değiştirme.
As always, before proceeding to replace the stand on the Piaggio Si or for any other mechanical maintenance operation, it is good to lock the bike in a stable and safe position, so that we can work on it safely. As we can see from the images, the stand is attached to the frame with a pin that is secured, at both ends, by two elastic rings. To remove the stand, therefore, we must remove the pin. First, remove the elastic ring on the side of the exhaust (if we want to make the job easier, it would be better to remove that as well). Now, remove the elastic ring from the other side. Extract the pin from its seat and, in this way, we can remove the stand. Proceed to replace it with the new one. Place the spring in the same way it was positioned with the old stand. Put the bike on the ground, on the right side. Insert the pin in a way that locks the stand and the springs in place. Finally, secure the pin with the two elastic rings (first on the side of the exhaust) and attach the ends of the springs to the stand and the job is done! by ScegliAuto Daha fazla video
|
|
Bu sitede reklam için Yazın info@scegliauto.com
ScegliAuto, listelerde yer alan verilerin doğru olmama durumundan sorumlu değildir. Bir yanlışlık bildirmek veya ilgili faaliyetin sahibiyseniz lütfen şuraya yazın info@scegliauto.com
Sayfanın oluşturulması için geçen saniye sayısı: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Gizlilik bildirimi KDV numarası: IT01247470535 |