Kendin yap
Araçlar ve motosikletlerle ilgili sıkça sorulan sorular

Citroen C4 Picasso'nun anahtar pilini nasıl değiştirebilirim?

Araç modeli: Citroen C4 Picasso MK 2 - Yıllar 2013-2022
Bölüm: Anahtar

If the remote control of our Citroen C4 stops working, it may be that the battery is low or damaged. To replace it, we open the plastic cover of the key to reach the battery. In particular, we take the C4 key remote control and press the button to release the metal key. We find the exact point to lever to remove the cover. We hold the key remote control with one hand, with the other we insert a lever kit on the side of the cover where the metal key is housed. We exert pressure until the plastic cap covering the back of the key comes off. Here we will find the battery to be replaced, which is a flat Cr 2032 type 3V. Now we remove the old battery with a mini screwdriver and place the new 3V Cr 2032 battery (preferably of excellent quality for longer life). Finally, we close the key remote control with the cover cap (press until it locks into the plastic) and press the plastic covers after positioning them perfectly. To make sure we have done everything correctly, we test the remote control by opening and closing the car doors.

Eklendi 2 December 2021 by ScegliAuto

Video öğretici

İlgili eğitimler

Citroen C4 Picasso (2013-2022 / MK 2) Bu yeni mini rehberde, Citroen C4 Picasso Mk2'nin akıllı anahtarındaki düğme pili nasıl değiştirileceğini basit ve kolay adımlarla açıklayacağız. İlk…
Citroen C4 Picasso (2013-2022 / MK 2) İlk işlem olarak, tabii ki anahtarınızın fiziksel kısmını çıkarmak gerekecektir. Bunun için, krom halkanın altında bulunan düğmeye basmanız ve halkan…
Citroen C4 Picasso (2013-2022 / MK 2) Bu video öğreticisinde, Citroen C4 Picasso'nun anahtar kumandasının pilini nasıl çıkarıp değiştireceğimizi göreceğiz. İlk olarak, kumandayı elinize a…

İlginizi çekebilecek diğer rehberler

Volvo V40'ın motor yağı seviyesini nasıl kontrol edilir?

Bu videoda Volvo V40'ın yağ seviyesini nasıl kontrol edeceğimizi görüyoruz: aslında bu araçlarda seviye ölçümü için çubuk bulunmamaktadır, bu nedenle seviye gösterge panelinden kontrol edilmelidir. Öncelikle kontağı açıyoruz ve direksiyonun solunda bulunan sinyal kolu üzerindeki "ok" düğmesine basıyoruz. Yanında bir tekerlek bulunmaktadır ve çeşitli seçenekleri döndürerek yağ ampulünün çizimine ulaşana kadar ilerliyoruz. "Ok" tuşuna basarak yağ seviyesini görüyoruz. Bu işlemi aracın mutlaka düz bir zeminde, tüm kapılar, kaput, bagaj kapalı ve araç en az 5 dakika durmuş ve kapalı durumda olmalıdır.

Videoyu izle!


by ScegliAuto

Daha fazla video