Kendin yap
Araçlar ve motosikletlerle ilgili sıkça sorulan sorular

Vites seçicisinde burç değişimi ve merkezi tünelin sökülmesi.

Araç modeli: Ferrari 360 MK 1 - Yıllar: 1999, 2000, 2001, 2002, 2003, 2004
Bölüm: Şanzıman

Video öğretici

Remove the gear lever knob by unscrewing it. Also remove the metal plate of the gear selector and the cigarette lighter compartment by disconnecting the wires. Remove the leather cover of the armrest.

Now, in the tunnel compartment, the wiring connector of the switch panel can be accessed and disconnected. Cut the plastic tie of the handbrake lever protection and unscrew the tunnel screws with a hex key, taking care not to damage the plastic.

Gently remove the tunnel. Remove the spring pin and the C-ring seal at the base of the gear lever with a hex key and remove the spring.

Remove the plastic element around the shaft in the square support at the base with the help of someone. Once the old bushing is removed, install a new one on the shaft, fix it, and verify proper operation by moving the lever in all positions.

Carefully reassemble the remaining components and thoroughly grease the entire mechanism. Restore all other parts.


Eklendi 17 November 2014 by ScegliAuto


İlgili eğitimler

Ferrari 360 (1999-2004 / MK 1) Motor kaputunu açın ve motorun sağ tarafındaki koruyucu kapakları dikkatlice çıkarın. Motorun sıkıştırma vidalarını bulun ve sadece iki tanesini düşü…

Jeep Compass aracının arka aynalarının otomatik olarak açılıp kapanmasını nasıl etkinleştirebilirim?

Jeep Compass'ın dış dikiz aynalarının otomatik olarak kapanmasını ve açılmasını etkinleştirmemize izin verecek talimatları kısaca görelim. Öncelikle araca binip araç anahtarını açıyoruz; daha sonra ayna camı ayarının altında bulunan düğmeyi basarak aynayı elektrikle açıyoruz, videoda gösterildiği gibi. Düğmeyi ters yönde basarak aynaları kapatacağız; düğmeyi açık bırakarak, aynalar tamamen otomatik olarak açılıp kapanacaktır!

Videoyu izle!


by ScegliAuto

Daha fazla video