Kendin yap
Araçlar ve motosikletlerle ilgili sıkça sorulan sorular

Ön fren balatalarının değiştirilmesi

Araç modeli: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Yıllar: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Bölüm: Fren balataları

Diğer nesilleri gör:
Video öğretici

The video shows, in a friendly way thanks to its creators, how to replace the worn brake pads with the new ones you have purchased. To begin, you need to lift the car and remove the wheel, then remove the safety cap that covers the caliper support screw and unscrew it along with the others that hold the caliper attached to the disc.

Then, by levering the caliper, the pad to be replaced can be removed and replaced with the new one. At this point, you can start reassembling everything, but first make sure that the caliper works correctly by pressing the brake pedal with the dial on. The video refers to the Fiat Punto model.

The tools to use are a screwdriver and a special key (torx) that you will most likely find in the tool compartment in the trunk.


Eklendi 5 June 2015 by ScegliAuto


İlgili eğitimler

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Bu video eğitiminde, bir Fiat Grande Punto ve Punto Evo 199'un ön fren balatalarını nasıl sökeceğimizi ve değiştireceğimizi göreceğiz. İlk olarak tek…
Fiat Punto (1999-2011 / MK 2, 188) Ön fren balataları hasarlı mı? İçten kaliperden nasıl değiştirildiğini görelim. Arabayı müdahale etmek için uygun bir yüksekliğe kaldıralım. Teleskop…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Eğer aşınmışlarsa, Grande Punto üzerinde fren balatalarını değiştirin. Nasıl söküleceğini görelim. Teleskopik bir anahtarla cıvataları söküp tekerleğ…

Mitsubishi L200'de kaput nasıl açılır?

Bu öğreticide, Mitsubishi L200'deki motor kapağını nasıl açacağımızı görebiliriz. Bu işlem oldukça basit ve standart prosedürden farklı değildir. İlk olarak aracı açalım ve sürücü tarafına gidelim, ardından pedalların hemen önünde bulunan dış alt bölgedeki kolu bulalım ve hareket ettirelim. Daha sonra motor kapağının önüne geçelim, Mitsubishi logosunun üzerinde bulunan ikinci kolu sağa doğru itelim ve böylece kilidi açalım. Bu noktada motor kapağını tamamen kaldırabilir ve uygun çubuğa takabiliriz.

Videoyu izle!


by ScegliAuto

Daha fazla video