Kendin yap
Araçlar ve motosikletlerle ilgili sıkça sorulan sorular

Yakıt filtresinin değiştirilmesi

Araç modeli: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Yıllar 2005-2018
Bölüm: Dizel filtresi

The diesel filter is located in the engine compartment on the passenger side, just below the windshield: before starting the disassembly, it is suggested to place a basin under the vehicle to collect any diesel leaks and to disconnect the battery. The inlet and outlet pipes are fixed to the filter with safety valves: it is sufficient to press the safety to release them; then unscrew the pin of the filter's fixing clamp to remove it by disconnecting the socket from the lower part where the clogging sensor is located (this sensor should be applied to the new filter by replacing the o-ring gasket) and insert the new one; connect the pipes, making sure to engage the safeties. Turn on the ignition without starting the engine 3-4 times to fill the filter.

Eklendi 9 November 2014 by ScegliAuto

Video öğretici

İlgili eğitimler

Fiat Punto (1999-2010 / ) Yakıt filtresini değiştirmek, en yüksek performans için sık sık yapılması gereken basit bir işlemdir. Bu filtre değiştirme işlemi için çıkarmak için …
Fiat Punto (1999-2011 / MK 2, 188) Fiat Punto'da yakıt filtresini nasıl sökebilirsiniz? Bu videoda nasıl yapılacağını kendi başınıza ve en iyi şekilde göreceğiz. İlk olarak motor kaput…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Fiat Grande Punto'nuzun yakıt filtresini kendiniz değiştirmek istiyor musunuz, işçilik masrafına girmeden? Bu videoda nasıl yapılacağını ve en iyi şe…

Peugeot 5008'de yedek tekerlek nerede bulunur?

Bu videoda Peugeot 5008'de yedek lastiğin nerede bulunduğunu ve erişmek için nasıl ilerlememiz gerektiğini görebiliriz, tabii ki patlak lastik durumunda faydalı olacaktır. Gösterildiği gibi, lastik, bagaj bölmesinin klasik konutunda değil, aracın dışında altında yer almaktadır. Lastiği serbest bırakmak için önce ekipmanları alıyoruz, ardından bagajı açıyoruz, belirtilen küçük kapağı bulup açıyoruz. Daha sonra büyük boru anahtarı kullanarak lastiği yere yeterince indirecek şekilde yeni serbest bırakılan cıvataları gevşetiyoruz.

Videoyu izle!


by ScegliAuto

Daha fazla video