|
Kendin yap
| |||
| ||||
Arka far lambasını nasıl değiştirebilirim?
Araç modeli: Ford Focus
MK 3
- Yıllar 2011-2018
The replacement of the rear headlight bulb is among the simple maintenance interventions. The guide shows how to proceed with this replacement easily. We need a new bulb and a screwdriver. First, the headlight needs to be removed and the two screws that connect the black plastic of the headlight to the frame need to be unscrewed. The screws need to be removed and the headlight needs to be carefully extracted. Once completely separated, we remove the plastic connector that connects the cables to the headlight by lifting the plastic tab located at the bottom. Now, we release the four plastic tabs that lock the base on which the bulbs rest to the rest of the headlight and extract the base. Then, we insert the new bulb, making sure that the two protrusions located in the base go into the appropriate slots, and then we slightly rotate the bulb to secure it.
Eklendi 2 April 2018 by ScegliAuto
Video öğretici
İlgili eğitimler
Ford Focus
(2011-2018 /
MK 3)
Ford Focus'in arka farı nasıl değiştirilir? Arka farı sökmek için bagaj bölmesindeki parçaları nasıl sökeriz, görelim. Bagaj bölmesinin kapağını açıy…
Ford Focus
(2004-2011 /
Focus 2, MK 2)
Ford Focus'in plaka lambalarını sökmek ve değiştirmek için aşağıda belirtilen talimatları takip ederek, bu kısa ve basit kılavuzda göreceğiz. İlk ola…
Ford Focus
(1998-2004 /
MK 1)
Ford Focus 2000/2004 aracının arka lambasını ve ampullerini değiştirmek için öncelikle arka bagaj kapağını açmamız gerekmektedir. Bu şekilde arka lam…
İlginizi çekebilecek diğer rehberler
|
Peugeot 406'da ön amortisör nasıl sökülür?
Bir Peugeot 406'da ön amortisör nasıl sökülür? İlk adımı takip edelim: motor kaputunu kaldırıp destek çubuğuyla güvenli bir şekilde sabitleyelim. Amortisörün sıkma pimlerini (motor bölmesinde) uygun bir soket anahtarla sökelim, aracı bir kolon krikosuyla kaldıralım ve ön tekerleği çıkaralım; tekerleğin merkezine uygun bir soket anahtarla amortisörü tekerlek mili üzerindeki sıkma pimlerini sökelim (fren devresinin borularını tornavida ile çıkaralım). Yan tarafta bulunan pimleri sökelim, amortisörü yuvasından çıkaralım (bir destek çubuğu altına yerleştirme çubuğu yerleştirelim). Eski parçayı yeni parça ile karşılaştıralım ve montaja hazırlanalım. Yeni amortisörü geriye doğru takarak araca monte edelim. by ScegliAuto Daha fazla video
|
|
Bu sitede reklam için Yazın info@scegliauto.com
ScegliAuto, listelerde yer alan verilerin doğru olmama durumundan sorumlu değildir. Bir yanlışlık bildirmek veya ilgili faaliyetin sahibiyseniz lütfen şuraya yazın info@scegliauto.com
Sayfanın oluşturulması için geçen saniye sayısı: 0.032
(c) ScegliAuto 2026 - info@scegliauto.com - Gizlilik bildirimi KDV numarası: IT01247470535 |