Kendin yap
Araçlar ve motosikletlerle ilgili sıkça sorulan sorular

Arka ışıkların lambalarını nasıl değiştirebilirim?

Araç modeli: Volkswagen Jetta MK 6, A6 - Yıllar: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Bölüm: Arka far ampulü

Diğer nesilleri gör:
Video öğretici

The rear lights and therefore the bulbs are distributed in two groups. The first group is fixed to the trunk lid. To remove it, you need to open the trunk and remove the cover from the inside.

After unscrewing the two screws, you can remove the light assembly and by levering on the two tabs, you will remove the bulb holder plate. Here, for example, you will find the reverse light and the position light.

Once you have replaced the bulbs, reinsert the plate, the light assembly, and screw the nuts back on, finally closing it with the cover. The other bulbs are located in the light assembly at the corner of the body.

In this case, you also need to remove the cover from the inside and unscrew a white plastic screw. After doing this, you can remove the component and disconnect the electrical connector.

Now, by moving the tabs, with the help of a screwdriver perhaps, extract the bulb holder. In this case, you can replace the turn signal and brake light bulbs.

Reinsert the bulb holder, attach the electrical connector, and reinsert the light into its housing. Screw the plastic screw back on and reposition the cover.

Car model: VW Jetta MK 6 Year: 2011-2016 Required tools: small flat-blade screwdriver, 10mm socket wrench.


Eklendi 4 December 2017 by ScegliAuto


İlgili eğitimler

Volkswagen Jetta (2010-2018 / MK 6, A6) Jetta'nın ön farını ve lambalarını nasıl değiştirebilirim? İşlem çok karmaşık değil, sökme işlemine bakalım. Bagaj kapağını açıp kaldırıyoruz, plasti…
Volkswagen Jetta (1998-2005 / MK 4, A4) Bu kılavuzda, Volkswagen Jetta'daki düşük ışıkları nasıl değiştireceğimizi görebiliriz, bu işlem çok basit ve hızlıdır. Bunun için, doğru yedek lamba…
Volkswagen Jetta (1998-2005 / MK 4, A4) Süpürgelik alt kaplama dokusunun ayrılması, çeşitli modellerde çok yaygın bir kusurdur; bu sorunu çözmek için eski dokuyu çıkarmak ve yeni bir tane y…
ScegliAuto, 12 dilde sunulan geniş bir uluslararası otomobil eğitim rehberi koleksiyonudur. Her rehber, gösterici videoları deneyimli insan editörler tarafından yazılmış özgün açıklamalarla birleştirir ve ilgili otomobil modelleri hakkında bilgiler içerir.

Land Rover Range Rover Evoque'nin lastik basınç uyarı lambasını nasıl sıfırlayabilirim?

Bugün Land Rover Range Rover Evoque'nin lastik basınç uyarı lambasını sıfırlamamızı sağlayacak adımları keşfedelim. İlk olarak araca binip gösterge tablosunu açıyoruz; ardından araç bilgisayarının ayarlarına girip lastik basıncı seçeneğine gidiyoruz, böylece değerlerini görüntüleyebiliyoruz, videoda gösterildiği gibi. Bu noktada, gösterge tablosunda görünen lastik basınç uyarısını sıfırlamak için dört lastikte de doğru basıncı geri yüklüyoruz!

Videoyu izle!


by ScegliAuto

Daha fazla video