Kendin yap
Araçlar ve motosikletlerle ilgili sıkça sorulan sorular

2003 model Volvo XC90'da servis uyarı lambasını nasıl sıfırlarım?

Araç modeli: Volvo Xc90 MK 1 - Yıllar 2002-2014
Bölüm: Servis uyarı ışığı

The video illustrates the manual procedure for resetting the service indicator in the Volvo Xc90. First of all, it is necessary to locate the button located at the bottom right of the odometer. If the maintenance indicator flashes, it may mean that one of the maintenance parameters has not been programmed. To do this, an appropriate diagnostic tool must be used. Also, check that there are no fault codes indicated on the instrument panel. At this point, we can start the reset procedure. Close all car doors and turn on the instrument panel by placing the key in position | (partial ignition). Press and hold the button in position |. Within 4 seconds from the start of the previous operation, turn the key to position || (while still holding down the button |). When the maintenance indicator starts flashing, release the button within 5 seconds. In the end, an audible signal will indicate that the reset has been successful.

Eklendi 18 March 2019 by ScegliAuto

Video öğretici

İlgili eğitimler

Volvo Xc90 (2015-2026 / MK 2) Volvo XC90'un lastik basınç uyarı lambasını sıfırlamak için öncelikle lastikleri doğru şişirme basıncına getirmek için hava basmalısınız: doğru basın…
Volvo Xc90 (2015-2026 / MK 2) 2024 model yeni Volvo XC90'un gösterge panelinde sürekli olarak beliren bakım uyarı ışığını manuel olarak sıfırlamak gerçekten çok basittir ve aşağıd…
Volvo Xc90 (2002-2014 / MK 1) Bu videoda, Volvo XC90 ve diğer tüm modellerde hava yastığı hata lambasını sıfırlamak için talimatları göreceğiz. İlk olarak, teşhis için bilgisayarı…

Opel Astra'da düğmeyi nasıl sökerim?

Opel Astra'da vites topuzunu nasıl değiştiririz? Bu videoda nasıl söküleceğini görelim: deri vites körüğünün çerçevesini (değiştirmemiz gerekiyorsa) plastik bir kaldıraçla ayıralım. Her iki elimizle de topuzu tutup yukarı doğru (güçlü ve kararlı bir hareketle) çekerek değiştirelim. Montajı yapmak için: yeni körüğü takın ve orta tünele yerleştirin, yeni topuzu alıp çubuğa takın, topuzun vida bölümüne kadar sıkın. Topuzun doğru bir şekilde monte edildiğini kontrol etmek için çubuğun orta tüneldeki hareketiyle test edin.

Videoyu izle!


by ScegliAuto

Daha fazla video