Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Aprilia
    3. : Rs660 : How to change the engine oil of an Aprilia RS660?

Model: Aprilia Rs660
Part: Engine oil
How to change the engine oil of an Aprilia RS660?

To change the motor oil of an Aprilia RS660, start by making sure the motorcycle is positioned on a flat surface and that the engine is cold. Usually, it is best to do it after riding the motorcycle for a short period, so that the oil is warm and flows more easily during drainage. Find the oil drain plug on the engine, usually located on the lower side of the engine. Place an oil collection container under the drain plug. Unscrew the drain plug with an appropriate wrench and let the used oil drain completely into the container. Once the oil is completely drained, make sure the drain plug is tightened back on. Now, locate the oil fill plug on the engine, usually located on the upper side of the engine. Remove the fill plug and use a funnel to pour the new oil into the engine. Consult the owner's manual to determine the quantity and type of oil recommended for your Aprilia RS660. Once the new oil is added, replace the fill plug and make sure it is securely closed, and we have completed the replacement.


Posted on 13 April 2024 by ScegliAuto



How to change the engine oil of an Aprilia RS660?
Rs660 To change the motor oil of an Aprilia RS660, start by making sure the motorcycle is positioned on a flat surface and that the engine is cold. Usually
How to change the engine oil of an Aprilia Shiver
Shiver It is advisable to carry out this operation with the engine slightly warm. So let's start by placing our Aprilia Shiver on a motorcycle stand. Next w
How to change the engine oil and oil filter on Aprilia Mana 850
Mana 850 Gt In this short and simple guide we will see how to carry out the routine maintenance service of the oil change of the Aprilia Mana 850 motorcycle. dra

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos