Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Benelli
    3. : Patagonian Eagle 250 : How to replace the engine oil in the Benelli Patagonian Eagle 250?

Model: Benelli Patagonian Eagle 250
Part: Engine oil
How to replace the engine oil in the Benelli Patagonian Eagle 250?

In this tutorial, we can see how to replace the engine oil in the Benelli Patagonian Eagle 250, a very simple and quick operation. First of all, start the engine and let it warm up for a couple of minutes, then turn it off and place a container underneath it. Next, remove the control rod located on the right side, unscrew the drain plug with a 17mm wrench, and let all the oil inside the system drain out. At this point, we can clean any possible dirt residue, tighten the plug, and insert the new oil through the control rod hole.


Posted on 25 September 2023 by ScegliAuto

This video is currently unavailable


How to replace the engine oil in the Benelli Patagonian Eagle 250?
Patagonian Eagle 250 .. In this tutorial, we can see how to replace the engine oil in the Benelli Patagonian Eagle 250, a very simple and quick operation...
How do you change the engine oil of the Benelli Leoncino 250?
Leoncino 250 In order to change the engine oil of the Benelli Leoncino 250 it is necessary to loosen the drain plug located in the lower central part of the bike:
Change the engine oil and oil filter on Benelli TNT 250
Tnt 250 Let's see how to carry out the routine maintenance service, replacing the engine oil and the oil filter, on a Benelli Tnt 250 motorcycle. First of al

How do you replace the piston on the Sherco SE 250?

The Sherco SE 250 piston is replaced by loosening the screws that secure the cylinder in the upper part of the engine block: in order to remove this cylinder it will also be necessary to disconnect the connectors connected to the engine block itself. Once the cylinder has been removed, it will be possible to access the underlying piston, which will have to be detached from the relative connecting rod by removing the relative fixing ring. When this in turn has been removed, it will be possible to insert the new spare part, then also installing the cylinder.

Watch the video!


by ScegliAuto

More videos