Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Beta
    3. : Beta M4 : Replacing the license plate holder in the Beta M4

Model: Beta Beta M4
Part:
Replacing the license plate holder in the Beta M4

To replace the Beta M4 license plate holder, first of all, we proceed to position the bike itself in a stable and safe way to be able to work on it. At this point, remove the saddle and disassemble the license plate holder by unscrewing the appropriate bolts. Once this operation has been done, we cut, using a hacksaw, and hold the part of the support where the lights / stops are present. We proceed to the operation of trimming and sanding of the same. Create a new hole on the frame for a better locking of the new license plate holder. Create a spacer to be placed between the frame and the support with the lights / stop. Create another spacer to be positioned between the new license plate holder and the lights / license plate support. Add 2 supports, L-shaped, to be positioned in the subplate to position the arrows. Before positioning the same, remove the old indicator holders. Finally, we also have the possibility of mounting a reflector under the license plate itself. The result can be seen in the pictures.


Posted on 17 November 2023 by ScegliAuto



Beta RR 50 license plate holder replacement
Rr 50 Let's see in this video how to disassemble and replace the license plate holder of a Beta RR 50 motorcycle, in simple steps. First we go to unscrew t
Replacing the license plate holder in the Beta M4
Beta M4 To replace the Beta M4 license plate holder, first of all, we proceed to position the bike itself in a stable and safe way to be able to work on it.
How to install a new tailpipe and license plate holder on the Beta RR 390.
Rr 390 In this guide, we will see the instructions that will allow us to install a new rear fender, along with the license plate holder and the tail light,

How to change the Sym HD 200 engine oil

Let's see today the step-by-step instructions to be able to replace the engine oil and oil filter of the Sym HD 200 scooter. First of all we put the central stand to our scooter and start unscrewing the oil vent bolt that we find below the engine, letting it drain in a container for about ten minutes; then we go to clean the small oil filter, replacing it if damaged. At this point we unscrew the filler cap and top up, pouring the right type of oil and filling up to level (indicated with a notch on the dipstick).

Watch the video!


by ScegliAuto

More videos