Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Z3
  6. : How to remove the rear window of the soft top on the BMW Z3

BMW Z3 - Video tutorial

Model: BMW Z3 MK 1 - Years 1995-2002
Part: Rear window
Operation: How to remove the rear window of the soft top on the BMW Z3

In this video tutorial we will see how to remove and replace the plastic rear window of the soft top on the BMW Z3, following these simple steps. First of all, let's remove the hood hinges located near the rear window, using pliers; then let's remove the plastic rear window by detaching it from the side sticker, as shown in the video. At this point we are going to clean the side area of the soft top thoroughly, and then reassemble the new hinged rear window; we just have to follow the video to the end for the complete reassembly!


Posted on 13 March 2024 by ScegliAuto



How is the hard top mounted on the BMW Z3?
BMW Z3 (1995-2002 / MK 1) How is the hard top mounted on the BMW Z3? To mount the hard top on our BMW Z3, we have to follow this simple guide, step by step. 1) First of all, i
Soft top replacement on BMW Z3
BMW Z3 (1995-2002 / MK 1) With the car uncapped, remove the two small hydraulic covers on the sides of the car. Behind the seats, move the fabric and remove the screw covers.
How do you remove the rear cover of the speedometer from the BMW Z3?
BMW Z3 (1995-2002 / MK 1) In order to replace the rear cover of the BMW Z3, you must first remove the speedometer from inside its housing, unscrewing the special screws and di

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos