Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 1
    4. : Where is the windshield washer pump fuse located in the BMW 1 Series?

BMW Serie 1 - Video tutorial

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Pump
Operation: Where is the windshield washer pump fuse located in the BMW 1 Series?

In this video we can see where the fuse of the windshield washer pump is located in the BMW 1 Series, which is the first element to check in case it suddenly stops working. As shown, the fuse in question is located in the box inside the cabin, specifically behind the passenger glove compartment. It is labeled with the code F48 and is 20A. If it is faulty, make sure to replace it with a replacement with equivalent characteristics and always operate with the vehicle turned off, otherwise we may damage the pump itself.


Posted on 16 April 2024 by ScegliAuto



Where are the fuses located in the BMW 1 Series?
BMW Serie 1 (2011-2019 / F21, MK 2, F20) In the BMW 1 Series, all fuses are contained within the appropriate fuse boxes that are installed on the vehicle: in this car model, it is possible t
Where are the fuses located in the BMW 1 Series?
BMW Serie 1 (2011-2019 / F21, MK 2, F20) Every fuse in the BMW 1 Series is located inside one of the appropriate fuse boxes that are installed in the vehicle: in this type of car, two boxes
Where is the fuse box located in the BMW 116?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) The BMW 1 Series model 116 has two fuse boxes inside and many cigarette lighter sockets, each with its own fuse. The first fuse box is located inside

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos