Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Captiva
    4. : How to repair the passenger side handle on a Holden Captiva car.

Chevrolet Captiva - Video tutorial

Model: Chevrolet Captiva C100 - Years 2006-2010
Part: Handle
Operation: How to repair the passenger side handle on a Holden Captiva car.

As seen in the video, to repair the passenger side handle of the Chevrolet Holden Captiva car, you need to act from inside the door by unscrewing the three cross screws positioned inside the door opening. At this point, you need to remove the internal cover by unhooking it from the pins. Remove the cover corresponding to the handle, and the problem is that one pin is no longer gripping. You need to use an electric drill and make a small hole (just big enough for a tie wrap) in the bodywork corresponding to the handle and the pin, as shown in the video. You also need to apply some glue to prevent it from moving.


Posted on 2 June 2023 by ScegliAuto



How to remove the door handle of the Holden Captiva.
Chevrolet Captiva (2006-2016 / CG) Today we will explain the steps to disassemble the door handle of a Holden Captiva. The first step is to open the door where we need to remove the ha
How to replace the external door handle of the Holden Captiva
Chevrolet Captiva (2006-2016 / CG) Let's find out in this short guide how to remove and replace the external door handle of the Holden Captiva, in simple and quick steps. First we open
How to remove the interior panel of a front door on a Holden Captiva
Chevrolet Captiva (2006-2018 / CG) How to remove the upholstery from the door of a Holden Captiva to repair the outside handle, which is broken. The fixing screws are all cleverly hidd

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos