Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Captiva
    4. : How to remove the door handle of the Holden Captiva.

Chevrolet Captiva - Video tutorial

Model: Chevrolet Captiva CG - Years 2006-2016
Part: Handle
Operation: How to remove the door handle of the Holden Captiva.

Today we will explain the steps to disassemble the door handle of a Holden Captiva. The first step is to open the door where we need to remove the handle, and then using a 25mm Torx key, we remove the side screws as shown in the video. The second step is to disconnect the white lever of the handle, for this you will need to have already opened the side panel of the door. Once the lever is removed, we can extract the part where the opening key is inserted. The third and final step is to remove the remaining part of the handle by pulling it towards the outside.


Posted on 28 September 2023 by ScegliAuto



How to replace the external door handle of the Holden Captiva
Chevrolet Captiva (2006-2016 / CG) Let's find out in this short guide how to remove and replace the external door handle of the Holden Captiva, in simple and quick steps. First we open
How to repair the passenger side handle on a Holden Captiva car.
Chevrolet Captiva (2006-2010 / C100) As seen in the video, to repair the passenger side handle of the Chevrolet Holden Captiva car, you need to act from inside the door by unscrewing the
How to remove the interior panel of a front door on a Holden Captiva
Chevrolet Captiva (2006-2018 / CG) How to remove the upholstery from the door of a Holden Captiva to repair the outside handle, which is broken. The fixing screws are all cleverly hidd

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos