Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C5
    4. : How to replace the stabilizer bar bushings in the Citroen C5?

Citroen C5 - Video tutorial

Model: Citroen C5 MK 2, X7, RD - Years 2008-2017
Part: Bushings
Operation: How to replace the stabilizer bar bushings in the Citroen C5?

In this tutorial we can see how to replace the stabilizer bar silent blocks in the Citroen C5, a simple operation but one that requires good manual skills. First of all, we lift the front side of the vehicle, taking all necessary safety measures, then we go underneath it, on the side where we will work, and we remove the trapezoidal frame indicated with a 13mm wrench. We then unscrew the single fixing bolt of the bar attachment, lift the bar using a lever and separate the old bushing from it. Finally, we position the replacement and reassemble everything following the reverse procedure.


Posted on 28 April 2024 by ScegliAuto



How to remove the stabilizer bar on the front of a Citroen C5
Citroen C5 (2000-2008 / MK 1, DC) Let's see how to remove the stabilizer bar on the front of a Citroen C5. Let's see how to proceed: we position our car on a column bridge, we lift to
How to remove the front stabilizer support on a Citroen C5
Citroen C5 (2000-2008 / MK 1, DC) We see in this video the disassembly of the front stabilizer support on a Citroen C5. We lift the car with a column bridge and put it in safety (we r
Where is the OBD port of the Citroen C5 2010 located?
Citroen C5 (2008-2017 / MK 2, X7, RD) In this new guide dedicated to all of you who own a Citroen C5 second series (year 2010) we will discover where the OBD port is located, through whic

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos