Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to replace the rear axle silent blocks in the Peugeot 206?

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Bushings
Operation: How to replace the rear axle silent blocks in the Peugeot 206?

In this tutorial, we can see how to replace the rear suspension bushings in the Peugeot 206, an operation that requires good manual dexterity. First, we lift the rear side of the vehicle, then we remove both the wheels and the entire braking system, also disconnecting the respective tubes from the frame. We continue by removing the exhaust silencer, supporting the suspension with two jacks positioned at the ends, and unscrewing the two fixing bolts. At this point, we can remove the worn-out bushing, using an extractor if possible, install the replacement, and reassemble everything.


Posted on 2 November 2023 by ScegliAuto



Remove the arm on the rear axle on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Do we want to remove the arm on the rear axle on Peugeot 206? Let's see carefully how to do it: loosen the pins of the rim with a special tool (teles
How to change the pollen filter on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) The guide shows how to replace the pollen filter on the Peugeot 206. The first step is to open the bonnet. On the left of the compartment, in the upp
How do you remove the rear panel of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In order to remove the rear panel of the Peugeot 206, you need to lift the rear seat cushion and lower the backrest of the rear seats so that the pan

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos