Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : How to replace the light switch on a Dacia Sandero

Dacia Sandero - Video tutorial

Model: Dacia Sandero BS - Years 2008-2012
Part: Steering wheel
Operation: How to replace the light switch on a Dacia Sandero

How to replace the light deflector on a Dacia Sandero? Before disassembling the diverter, disconnect the battery power supply terminals. Using a suitable screwdriver, unscrew the plastics covering the steering wheel (plastics present on all sides). To access the light switch, we do not have to remove the airbag or the steering wheel from the steering tube. We disconnect the power supply terminals of the light switch and the horn once removed. We extract the diverter of the lights from the steering tube and the other attached pieces. To reassemble everything, let's proceed backwards.


Posted on 21 November 2023 by ScegliAuto



How to replace the turn signal switch on the Dacia Sandero.
Dacia Sandero (2012-2020 / B8) Below are the instructions that will allow us to disassemble and replace the turn signal and hazard light switch of the Dacia Sandero Stepway, in sim
How to remove the light switch of a Dacia Sandero
Dacia Sandero (2008-2012 / BS) How to disassemble the light switch of a Dacia Sandero? Let's see in this video how to proceed with the disassembly. Before disassembling the car ste
How to reset the Dacia Sandero service warning light
Dacia Sandero (2008-2012 / BS) Today we will see the instructions on how to reset the service light of the routine maintenance of the oil change of a second series Dacia Sandero. F

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos