Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Daihatsu
    3. : Yrv : Replacing the sidelights on Daihatsu YRV

Daihatsu Yrv - Video tutorial

Model: Daihatsu Yrv M200, MK 1 - Years 2000-2005
Part: Headlight bulb
Operation: Replacing the sidelights on Daihatsu YRV

First lift the hood and secure it. As shown in the video, to replace the position light all you need to do is extract the connector from its seat by turning it slightly and pulling it out from the rear. Now literally pull the bulb out of the connector and that's it. Proceed backwards by inserting the bulb into the connector and fitting everything in place. The other headlight bulbs can also be removed by accessing them from behind, disconnecting their connectors and removing the rear covers (and unhooking any retainers on the bulbs).


Posted on 4 April 2024 by ScegliAuto



Replacing the sidelights on Daihatsu YRV
Daihatsu Yrv (2000-2005 / M200, MK 1) First lift the hood and secure it. As shown in the video, to replace the position light all you need to do is extract the connector from its seat by
How do you change the engine oil on the Daihatsu Cast?
Daihatsu Cast (2015-2023 / MK 1) In order to replace the Daihatsu Cast engine oil, you need to access the lower part of the car, so that you can access the components in the lower pa
How to replace the engine oil and oil filter of a Daihatsu Copen.
Daihatsu Copen (2002-2012 / MK 1) This short guide will show us the steps to perform routine maintenance on the Daihatsu Copen, replacing the motor oil and oil filter. Firstly, we lif

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos