Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. DFSK
    3. :
  3. Glory 580
    4. : How to replace the battery of the DFSK Glory 580 remote control?

DFSK Glory 580 - Video tutorial

Model: DFSK Glory 580 MK 1 - Years 2022-2024
Part: Key
Operation: How to replace the battery of the DFSK Glory 580 remote control?

Replacing the battery of the DFSK Glory 580 remote control, as we can see in this tutorial, is an extremely simple and fast operation. To do this, we will need a replacement battery of type CR2032 and, if necessary, a small flat-tip screwdriver. Let's start by extracting the emergency metal key by pressing the appropriate button, then we lever in the indicated slot and separate the two halves of the remote control. Then, we remove the internal circuit, insert the new battery respecting its polarity, and follow the reverse procedure to reassemble everything.


Posted on 14 February 2024 by ScegliAuto



How do you replace the battery of the DFSK Glory 580 remote control?
DFSK Glory 580 (2022-2024 / MK 1) In order to replace the battery of the DFSK Glory 580 remote control, you need to press the button located on the back of the device so that the key
How to replace the battery of the DFSK Glory 580 remote control?
DFSK Glory 580 (2022-2024 / MK 1) Replacing the remote control battery of the DFSK Glory 580, as we can see in this tutorial, is an extremely simple and quick operation. To do this, w
How to replace the battery of the DFSK Glory remote control
DFSK Glory 580 (2022-2024 / MK 1) Below we will see the step-by-step instructions that will allow us to disassemble and replace the battery of the DFSK Glory key remote. First, take o

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos