Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. DFSK
    3. :
  3. Glory 580
    4. : How to replace the battery of the DFSK Glory remote control

DFSK Glory 580 - Video tutorial

Model: DFSK Glory 580 MK 1 - Years 2022-2024
Part: Battery
Operation: How to replace the battery of the DFSK Glory remote control

Below we will see the step-by-step instructions that will allow us to disassemble and replace the battery of the DFSK Glory key remote. First, take our remote control and start removing the plastic back cover, levering on the sides; then remove the battery compartment cover, in order to access the battery, as shown in the video. At this point, remove and replace the battery with the new one, of the correct type; insert it in the correct direction and reassemble the battery cover, finally testing the operation of the commands!


Posted on 12 March 2024 by ScegliAuto



How to replace the battery of the DFSK Glory 580 remote control?
DFSK Glory 580 (2022-2024 / MK 1) Replacing the battery of the DFSK Glory 580 remote control, as we can see in this tutorial, is an extremely simple and fast operation. To do this, we
How do you replace the battery of the DFSK Glory 580 remote control?
DFSK Glory 580 (2022-2024 / MK 1) In order to replace the battery of the DFSK Glory 580 remote control, you need to press the button located on the back of the device so that the key
How to replace the battery of the DFSK Glory 580 remote control?
DFSK Glory 580 (2022-2024 / MK 1) Replacing the remote control battery of the DFSK Glory 580, as we can see in this tutorial, is an extremely simple and quick operation. To do this, w

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos