Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ducati
    3. : Monster S4r : How to replace the coolant on the Ducati Monster S4R

Model: Ducati Monster S4r
Part: Antifreeze liquid
How to replace the coolant on the Ducati Monster S4R

In this guide, let's see how to bleed and top up the coolant on the Ducati Monster S4R motorcycle. First of all, we put our bike on the stand and start unscrewing the bleed screw that we find on the water pump casing, using a socket wrench; also remove the rubber sleeve and let the fluid drain into a container for about ten minutes. At this point we unscrew the filler cap of the radiator, thus topping up; we use the coolant suitable for our radiator, filling up to the maximum level!


Posted on 9 June 2023 by ScegliAuto



How to replace the coolant on the Ducati Monster S4R
Monster S4r In this guide, let's see how to bleed and top up the coolant on the Ducati Monster S4R motorcycle. First of all, we put our bike on the stand and sta
How to remove the left footboard of a Ducati Monster 600
Monster 600 Before we can start, we will have to go and place our Ducati Monster 600 on the side stand. So let's start by disassembling and removing the left ter
What is the fuse diagram for the Ducati Monster 973?
Monster 973 In this video, we can see the fuse layout of the Ducati Monster 973 and the location of their respective boxes, which is useful in case we need to ch

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos