Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ducati
    3. : Monster 795 : How to change the engine oil in the Ducati Monster 795?

Model: Ducati Monster 795
Part: Engine oil
How to change the engine oil in the Ducati Monster 795?

Replacing the engine oil in the Ducati Monster 795, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, we wait for the engine to cool down enough. We start by placing a container under the bike, then we open the cap of the filler hole, unscrew the bolt of the drain hole with a hex key and let all the oil contained in the system come out. We then extract the secondary filter, clean it from any possible residue and proceed to replace the main filter. At this point, all that remains is to insert the new oil through the upper hole.


Posted on 29 May 2023 by ScegliAuto



How to change the engine oil in the Ducati Monster 795?
Monster 795 Replacing the engine oil in the Ducati Monster 795, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, we
How to replace the battery of the Ducati Monster 795?
Monster 797 In order to replace the battery of the Ducati Monster 795 you must first raise the saddle, so that the screws securing the fuel tank can be loosened.
How to replace the battery of the Ducati Monster 795 - 797
Monster 797 In today's video tutorial we will see the steps on how to remove and replace the battery of the Ducati Monster 795, but also of the 797. First we are

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos