Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Enfield
    3. : 500 Classic Chrome : Oil and filter change on Royal Enfield 500 classic chrome

Model: Enfield 500 Classic Chrome
Part: Oil filter
Oil and filter change on Royal Enfield 500 classic chrome

There are three screws that hold the oil filter guard fixed to the motorcycle fairing: unscrew them. Removing the protection you will notice that it is not only superficial but also has a piece that ends in a large o-ring, which I recommend to change (the new one or lubricate it using used oil as well). Remove the oil filter by simply inserting your finger and pulling it out. Now, from the bottom of the bike, remove the other small filter and unscrew the nut that holds the drain hole closed. Collect the oil in a tray and proceed backwards: fit the new filters by lubricating the o-r first, close the drain hole and fill in the new oil.


Posted on 22 December 2023 by ScegliAuto



Oil and filter change on Royal Enfield 500 classic chrome
500 Classic Chrome There are three screws that hold the oil filter guard fixed to the motorcycle fairing: unscrew them. Removing the protection you will notice that it
Replacement of the engine oil and oil filter of the Royal Enfield Classic 500.
Classic 500 Today's guide will show us the steps to replace the engine oil and oil filter, performing the routine maintenance check on the Royal Enfield Classic
How to replace the engine oil in the Royal Enfield Classic 500?
Enfield Classic In this tutorial, we can see how to replace the motor oil in the Royal Enfield Classic 500, a very simple and quick operation to be carried out every

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos