Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Fantic Motor
    3. : 125 4t : How to do the service on the Fantic 125 - Beta RR 125

Model: Fantic Motor 125 4t
Part: Engine oil
How to do the service on the Fantic 125 - Beta RR 125

In this video we will see the step by step instructions to be able to change the engine oil on a Fantic 125 4-stroke enduro bike, but also on the Beta RR 125 and on most enduro bikes. First of all, let's warm up the engine for a few minutes; then we unscrew the oil vent bolt that we find under the engine, using a socket wrench: then let the oil drain into a container. Now we can remove and replace the oil filter, inserting it correctly; we just have to open the filler cap and pour in the new engine oil, of the right type!


Posted on 15 February 2024 by ScegliAuto



How to do the service on the Fantic 125 - Beta RR 125
125 4t .. Fantic 125 4-stroke enduro bike, but also on the Beta RR 125 and on most enduro bikes. First of all, let's warm up the engine for a few minutes; then..
How to turn on a Beta RR 125
Rr 125 .. begin by going to sit on the driver's seat of our Beta RR 125. After that, we will have to insert the key in the ignition, then turn it, thus activating..
Beta 125 RR-S engine oil replacement
Beta 125 Rr S In this video tutorial we will see how to replace the engine oil of a Beta 125 RR-S, performing the normal service with relative replacement of the f

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos