Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Tipo
    4. : How do you replace the rear brake pads of the Fiat Tipo?

Fiat Tipo - Video tutorial

Model: Fiat Tipo 358, 357, 356 - Years 2016-2023
Part: Brake pads
Operation: How do you replace the rear brake pads of the Fiat Tipo?

In order to replace the rear brake pads of the Fiat Tipo, you need to lift the car using a jack so that the corresponding wheel is not in contact with the ground. Then, by removing the wheel from the hub, you will be able to locate the corresponding brake caliper. This should be detached from the disc by loosening the fixing screws. In this way, the pads inside it can be replaced with new spare parts. After the replacement, you can reposition the caliper on the disc, fixing it with the appropriate screws and mounting the corresponding wheel back on.


Posted on 20 March 2024 by ScegliAuto



How to replace the front brake pads of the Fiat Tipo?
Fiat Tipo (2016-2023 / 358, 357, 356) To be able to replace the front brake pads of the Fiat Tipo you have to lift the car using a jack or a bridge, so that the corresponding wheel is not
How to replace the front brake pads in the Fiat Tipo?
Fiat Tipo (2016-2023 / 358, 357, 356) In this tutorial, we can see how to replace the front brake pads in the Fiat Tipo, a simple operation but one that requires attention. We start by li
How to replace the brake pads of the Fiat Tipo
Fiat Tipo (2016-2023 / 358, 357, 356) If we want to proceed with the replacement of the brake pads on our car, we can find the indications on how to behave in the description below. First

    Frequently Asked Questions

    • Fiat Tipo 2016-2023 - How much does it cost to replace the brake pads in a Fiat Tipo? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos