Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gasgas
    3. : Ex 250f : How do you change the engine oil of the GasGas EX 250F?

Model: Gasgas Ex 250f
Part: Engine oil
How do you change the engine oil of the GasGas EX 250F?

In order to change the engine oil of the GasGas EX 250F you have to unscrew the screws that fix the fairing on the left side of the bike and then loosen the oil tank drain plug, in the lower central part of the bike. When the cap has been loosened, it will be possible to collect all the used oil in a container and remove the oil filter from its housing on the left side of the motorcycle. Once the replacement has taken place, it will be possible to top up from the vent in the upper part of the crankcase on the right of the bike.


Posted on 24 May 2023 by ScegliAuto



How do you change the engine oil of the GasGas EX 250F?
Ex 250f In order to change the engine oil of the GasGas EX 250F you have to unscrew the screws that fix the fairing on the left side of the bike and then loo
How to replace the engine oil of the Gasgas MC 250F.
Mc 250f In this guide, we will discover the procedure for performing regular maintenance on the Gasgas MC 250F enduro motorcycle, specifically replacing the
Carry out the service (oil change) on Gasgas MC250F
Mc 250f Today we will see, in this video tutorial, how to carry out the ordinary maintenance service, by changing the oil, on a Gasgas MC 250F motorcycle. Fi

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos