Do it yourself
Frequently asked questions about cars and motorcycles

Gilera Dna 50 - Videoguide

Gilera Dna 50
How do you dismantle the engine of the Gilera DNA 50?

The disassembly procedure of the Gilera DNA 50 engine involves removing the engine from its housing by unscrewing the fixing screws and disconnecting all the …read all…
Posted on 18 May 2024 by ScegliAuto
Gilera Dna 50
How do you adjust the carburetor solenoid on the Gilera DNA 50?

In order to adjust the carburetor solenoid on the Gilera DNA 50, first you need to remove the solenoid from its housing: this will be accessible from the …read all…
Posted on 16 May 2024 by ScegliAuto
Gilera Dna 50
How do you replace the stator of the Gilera DNA 50?

In order to replace the stator of the Gilera DNA 50, you need to loosen the screws that fix the engine block to its supports: once this has been removed, you …read all…
Posted on 28 April 2024 by ScegliAuto
Gilera Dna 50
How to replace the spark plug of a Gilera DNA 50?

Good morning, today we will be replacing the spark plug on our Gilera DNA 50. Let's start by carefully removing the side fairings of the motorcycle. Next, we …read all…
Posted on 2 March 2024 by ScegliAuto
Gilera Dna 50
How do you dismantle the engine of the Gilera DNA 50?

The procedure for disassembling the engine of the Gilera DNA 50 is carried out by loosening the screws that fix it to the respective supports, so that it can …read all…
Posted on 22 February 2024 by ScegliAuto
Gilera Dna 50
How do you replace the fuel tank of the Gilera DNA 50?

In order to replace the tank of the Gilera DNA 50, you need to loosen the screws that secure it to its housing: the screws will be accessible after the seat …read all…
Posted on 17 December 2023 by ScegliAuto
Gilera Dna 50
How do you replace the butterfly valve of the Gilera DNA 50?

In order to replace the butterfly valve of the Gilera DNA 50, you need to disassemble all the components that are positioned above it: in particular, you will …read all…
Posted on 27 November 2023 by ScegliAuto
Gilera Dna 50
How do you replace the water pump of the Gilera DNA 50?

In order to replace the water pump of the Gilera DNA 50, it is necessary to completely disassemble the transmission casing, along with the related components …read all…
Posted on 13 July 2023 by ScegliAuto
Gilera Dna 50
How do you replace the starter motor of the Gilera DNA 50?

In order to replace the starter motor of the Gilera DNA 50, it is necessary to completely disassemble the engine block, removing it from its housing by …read all…
Posted on 22 June 2023 by ScegliAuto
Gilera Dna 50
How do you replace the transmission of a Gilera DNA?

Replacing the transmission of the Gilera DNA is done by opening the transmission housing itself: to do this, it will be necessary to unscrew the fixing screws …read all…
Posted on 30 April 2023 by ScegliAuto
Gilera Dna 50
How do you replace the transmission of the Gilera DNA 50?

The replacement of the transmission on the Gilera DNA 50 is carried out by loosening the screws that fix the casing at the rear wheel, on the left side of the …read all…
Posted on 7 May 2023 by ScegliAuto
Gilera Dna 50
How do you replace the throttle cable on the Gilera DNA 50?

In order to replace the accelerator cable of the Gilera DNA 50 it is necessary to loosen the bolts that fix the transmission casing, located on the left side …read all…
Posted on 1 December 2022 by ScegliAuto
Gilera Dna 50
How do you replace the Gilera DNA 50 variator?

In order to replace the Gilera DNA 50 variator, you need to open the transmission casing, which is located at the rear wheel, on the left side of the bike. …read all…
Posted on 29 September 2022 by ScegliAuto
Gilera Dna 50
How is the transmission of the Gilera DNA replaced?

In order to replace the transmission of the Gilera DNA 50 it is necessary to loosen the screws that secure the casing located in the rear part of the bike, in …read all…
Posted on 7 August 2022 by ScegliAuto
Gilera Dna 50
How to replace the air filter on the Gilera DNA 50?

The replacement of the air filter on the Gilera DNA 50 is carried out by loosening the screws that secure the casing positioned on the left side of the bike, …read all…
Posted on 22 May 2024 by ScegliAuto
Gilera Dna 50
How do you replace the air filter on the Gilera DNA 50?

In order to replace the air filter on the Gilera DNA 50 you have to loosen the screws that secure the casing at the rear wheel, on the left side and …read all…
Posted on 29 April 2024 by ScegliAuto
Gilera Dna 50
How do you replace the brake pads on the Gilera DNA 50?

In order to replace the brake pads of the Gilera DNA 50 you have to loosen the bolts that secure the brake caliper to the relative disc and disconnect the …read all…
Posted on 10 March 2024 by ScegliAuto
Gilera Dna 50
How to replace the fuel line on Gilera Dna 50

In today's video we will see the steps to be able to remove and replace the fuel line on a Gilera Dna 50cc. First we go to remove the side fairings of the …read all…
Posted on 5 February 2024 by ScegliAuto
Accelerator (1) Spark plugs (1) Carburetor (1) Checks and maintenance (1) Air filter (2) Engine (2) Starter motor (1) Brake pads (1) Pump (1) (1) Transmission (3) Valve (1) (1)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos