Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gilera
    3. :
  3. Dna 50
    4. : How do you replace the stator of the Gilera DNA 50?

Model: Gilera Dna 50
Part: Checks and maintenance
How do you replace the stator of the Gilera DNA 50?

In order to replace the stator of the Gilera DNA 50, you need to loosen the screws that fix the engine block to its supports: once this has been removed, you can proceed by loosening the screws that fix the side cover, removing it completely from its seat. At this point, you can locate the stator underneath, which can be removed from its housing and replaced with a new spare part. After the replacement, you can reattach the aforementioned cover to ensure that everything works correctly.


Posted on 28 April 2024 by ScegliAuto



How to replace the spark plug of a Gilera DNA 50?
Dna 50 Good morning, today we will be replacing the spark plug on our Gilera DNA 50. Let's start by carefully removing the side fairings of the motorcycle.
How do you replace the air filter on the Gilera DNA 50?
Dna 50 In order to replace the air filter on the Gilera DNA 50 you have to loosen the screws that secure the casing at the rear wheel, on the left side and
How do you replace the transmission of the Gilera DNA 50?
Dna 50 The replacement of the transmission on the Gilera DNA 50 is carried out by loosening the screws that fix the casing at the rear wheel, on the left si

How to change the light bulb on a Peugeot Kisbee

In this video we can see how to change the front light bulb of the Peugeot Kisbee scooter: first of all, we need to remove the front shield, unscrewing the six torx screws on the edges of the shield that will allow us to remove it easily. In the center we will find the cap where the bulb is inserted; we will have to unscrew the rubber cap slightly and remove it, after removing the electrical connector. Here we replace the bulb with one of those provided and then put the bulb holder back in place (always remember not to touch the bulb of the new bulb with bare hands). put the cap back in place, put the electrical connector back in place and also the six screws that hold the shield in place. Job done.

Watch the video!


by ScegliAuto

More videos