Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gilera
    3. : Arizona 250 : Disassembly of Gilera Arizona 250 Rally forks

Model: Gilera Arizona 250
Part:
Disassembly of Gilera Arizona 250 Rally forks

In this video tutorial we will see how to disassemble, in simple steps, the forks of a Gilera Arizona Rally 250. First we position the rear stand on the bike and we go to remove the front wheel, unscrewing the wheel blocks with a 10 mm wrench; after which we perform the same operation on the other side, as shown in the video. At this point we unscrew the central bolt and extract the front wheel; then we disassemble the fork stems, after having unscrewed the upper fixing bolts: we just have to follow the video tutorial to the end, to better understand all the steps!


Posted on 1 January 2024 by ScegliAuto



Disassembly of Gilera Arizona 250 Rally forks
Arizona 250 In this video tutorial we will see how to disassemble, in simple steps, the forks of a Gilera Arizona Rally 250. First we position the rear stand on
How do you replace the forks of the Gilera Runner 180?
Runner 180 In order to replace the forks of the Gilera Runner 180 you have to completely disassemble the front fairing that surrounds the steering: in this way
How do you replace the forks on the KTM EXC 250?
Exc 250 In order to remove the forks of the KTM EXC 250 you have to loosen the bolts that secure them from the top: these bolts are located in the part immed

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos