Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gilera
    3. : Crono 125 : How to replace the motor oil of a Gilera Crono 125?

Model: Gilera Crono 125
Part: Engine oil
How to replace the motor oil of a Gilera Crono 125?

Good morning, today we are here to replace the engine oil of our Gilera Crono 125. Before starting, it is important to have warmed up the engine for 5 minutes, and then to have positioned the motorcycle on a central stand, so that it is perfectly perpendicular to the ground. Let's start by unscrewing the top oil filler cap. Next, we will need to place a container underneath the oil pan, and then unscrew the lower drain plug, allowing all the engine oil to drain out. Once the engine oil has drained out, we will need to screw the lower drain plug back in. At this point, we can pour in the new oil through the top hole and screw the cap back on, and we will have completed the engine oil replacement of our Gilera Crono 125.


Posted on 19 February 2024 by ScegliAuto



How to replace the motor oil of a Gilera Crono 125?
Crono 125 Good morning, today we are here to replace the engine oil of our Gilera Crono 125. Before starting, it is important to have warmed up the engine for
How do you change the oil and oil filter of the Gilera Runner VX 125?
Runner Vx 125 To replace the oil and oil filter of the Gilera Runner VX 125 you need to heat the bike to make the oil more fluid. Then you will have to open the dr
Gilera Runner 125 engine oil replacement
Runner 125 In this video we will see the instructions on how to change the oil, performing the regular maintenance service, on a Gilera Runner 125 scooter. Firs

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos