Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Harley Davidson
    3. : Fxsb : Harley Davidson FXSB tank disassembly

Model: Harley Davidson Fxsb
Part: Wheel
Harley Davidson FXSB tank disassembly

In this video tutorial we will see how to remove the front wheel of a Harley Davidson FXSB. First of all, let's equip ourselves with a socket wrench and unscrew the bolt of the front wheel; after which we unscrew the hexagonal screws that we find at the bottom of the fork. At this point we are going to remove the central pin of our wheel, in order to be able to remove it, as shown in the video; before reassembling the wheel, it is necessary to properly lubricate the wheel pin and its seats, together with the bushings. Finally we reassemble the wheel again, following the video tutorial until the end!


Posted on 25 December 2023 by ScegliAuto



Harley Davidson FXSB tank disassembly
Fxsb In this video tutorial we will see how to remove the front wheel of a Harley Davidson FXSB. First of all, let's equip ourselves with a socket wrench
Harley Davidson Sportster 48 tank disassembly
Sportster Today we will see the instructions for removing the fuel tank of a Harley Davidson Sportster 48, but also on other models of the manufacturer. First
How to disassemble the fuel tank of the Harley Davidson Sportster
Sportster Today's guide will show us the steps on how to disassemble and replace the fuel tank of the Harley Davidson Sportster motorcycle. First, we put the m

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos