Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. : Nighthawk 750 : How to replace engine oil in Honda Nighthawk 750?

Model: Honda Nighthawk 750
Part: Engine oil
How to replace engine oil in Honda Nighthawk 750?

Replacing the engine oil in the Honda Nighthawk 750, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, make sure the engine is cool enough to operate safely. We start by placing a container under the bike, after which we locate the bleed hole bolt and unscrew it using a 17mm socket wrench. Once this is done, tighten the bolt, unscrew the old filter with the same wrench and fit the replacement. At this point, all that remains is to insert new oil through the appropriate hole, located on the right side of the engine.


Posted on 18 May 2023 by ScegliAuto



How to replace engine oil in Honda Nighthawk 750?
Nighthawk 750 Replacing the engine oil in the Honda Nighthawk 750, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, ma
How to replace Honda CB 750 engine oil and oil filter
Cb 750 Let's find out the procedure on how to carry out the routine maintenance service, replacing the engine oil and oil filter, of the Honda CB 750 motorc
To replace the engine oil and oil filter of the Honda CB 750.
Cb 750 The process of replacing the motor oil and oil filter takes a few minutes; let's see how to perform the routine maintenance on the Honda CB 750. Firs

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos