Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. : Xr 650l : How to replace the engine oil and oil filter of the Honda XR 650L.

Model: Honda Xr 650l
Part: Engine oil
How to replace the engine oil and oil filter of the Honda XR 650L.

Today we will see the process of replacing the engine oil and oil filter, thus performing the routine maintenance on the Honda Xr 650L. First, we put our bike on the center stand and start unscrewing the oil drain bolt located under the engine, letting it drain into a container for about ten minutes. Then, we unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one, as shown in the video. Finally, we pour the appropriate oil for our engine, as indicated in the owner's manual!


Posted on 2 February 2024 by ScegliAuto



How to replace the engine oil and oil filter of the Honda XR 650L.
Xr 650l Today we will see the process of replacing the engine oil and oil filter, thus performing the routine maintenance on the Honda Xr 650L. First, we put
How to replace engine oil and oil filter on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Today in this short video we are going to see how to change the oil and the engine filter on our Honda CR-V, it is not a very complex operation, just
Replacement engine oil and oil filter on Honda CB 500F
Cb 500f Let's see in this video how to change the engine oil and oil filter, performing the regular routine maintenance coupon, on a Honda CB 500F. First we

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos