Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Hyundai I20
  6. : Brake pads

Hyundai I20 - Brake pads

Hyundai I20 (2008-2014 / MK 1, PB)
How to replace the rear brake pads in the Hyundai I20?

In this tutorial, we can see how to replace the rear brake pads on the Hyundai I20, a very simple and quick operation but requires good manual dexterity. First …read all…
Posted on 12 October 2023 by ScegliAuto
Hyundai I20 (2014-2021 / IB, MK 2, GB)
How do you replace the front brake pads of the Hyundai I20?

To replace the front brake pads of the Hyundai I20, you need to lift the car with a jack so that the corresponding wheel is not in contact with the ground. …read all…
Posted on 3 July 2023 by ScegliAuto
Hyundai I20 (2014-2021 / IB, MK 2, GB)
How to replace the rear brake pads in a Hyundai i20

In this tutorial we are shown how to proceed in order to replace the rear brake pads in a Hunday i20; the same procedure is also valid for other models such as …read all…
Posted on 20 May 2024 by ScegliAuto
Hyundai I20 (2014-2021 / IB, MK 2, GB)
Replacing the brake pads on a Hyunda I20

Are the brake pads of the Hyundai I20 damaged? Let's see how they remove the brake from above. We lift the car with a column bridge, immediately after we go to …read all…
Posted on 8 December 2023 by ScegliAuto

Airbags (2) Alternator (1) Car stereo (12) Battery (4) Spark plugs (2) Bodywork (1) Key (9) Timing belt (7) V-belt (1) -board computer (7) Checks and maintenance (30) Tail light (1) Air filter (2) Cabin air filter (6) Diesel filter (1) Hand brake (1) Accessory Kit (1) Light bulb (1) Headlight bulb (5) Rear light bulb (3) Interior lights ceiling light bulb (1) Handle (2) Door panel (4) Front bumper (1) Rear bumper (2) Brake pads (4) Tires (3) Gear Shift Knob (1) Window lift button (2) Instrument cluster (11) Fuse box (7) Outside rearview mirror (2) Windscreen wipers (1) Central tunnel (1) Steering wheel (1)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos