Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Infiniti
  4. : Ex : How to replace the pollen filter on Infiniti EX 35.

Infiniti Ex - Video tutorial

Model: Infiniti Ex MK 1 - Years 2008-2013
Part: Cabin air filter
Operation: How to replace the pollen filter on Infiniti EX 35.

In this video tutorial we can see how it is possible to replace the pollen filter on Infiniti EX 35, following some simple steps: the first thing to do is to buy a new pollen filter from an authorized dealer. Next step we have to get in the car, turn off the car and apply the handbrake. The cabin filter on this car is located behind the glove box, so we have to open the drawer and we have to remove the material inside it to work more comfortably. Remove the side cover and then press the sides of the drawer inward while applying light pressure to remove it. At this point we must unscrew the six screws of the cover that covers the cabin filter (with a Phillips screwdriver). Once the screws have been unscrewed and the cover removed, we can remove the filter cover by pressing lightly; now we need to remove the filter element. Position the new filter element following the indications of the arrows on the filter itself.


Posted on 2 September 2022 by ScegliAuto



How to replace the pollen filter on the Infiniti QX60
Infiniti QX60 (2013-2020 / L50) We see below the instructions on how to disassemble and replace the cabin air or pollen filter from the Infiniti Qx60. First of all, we get on board
How to replace the pollen filter on Infiniti EX 35.
Infiniti Ex (2008-2013 / MK 1) In this video tutorial we can see how it is possible to replace the pollen filter on Infiniti EX 35, following some simple steps: the first thing to
Replacement of the cabin air filter of the Infiniti QX60
Infiniti QX60 (2013-2020 / L50) Replacing the cabin air filter or pollen filter is really very simple; let's see how to replace it on the Infiniti QX60. First of all, we get into th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos