Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Patriot
    4. : How do I remove the central dashboard panel of the Jeep Patriot?

Jeep Patriot - Video tutorial

Model: Jeep Patriot MK 1 - Years 2007-2017
Part: Dashboard
Operation: How do I remove the central dashboard panel of the Jeep Patriot?

In order to remove the central panel of the dashboard of the Jeep Patriot it is necessary to unscrew the gear knob, so that it can be removed from the relative lever. In this way it will be possible to remove the plastic cover placed around the lever and loosen the screws below. Subsequently, it will be necessary to remove the plastic panel of the upper part of the dashboard, loosening the screws underneath. This will allow you to detach the entire panel that surrounds the radio and the climate control controls: by disconnecting the rear connectors it will be possible to completely remove the piece.


Posted on 16 September 2022 by ScegliAuto



Replacement of the central plastic of the instrumentation and the radio of the Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) Let's go and see in this guide the procedure necessary for the disassembly and replacement of the central plastic of the dashboard and the radio of t
Replacement of the central stop on Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) Today we will show you a really simple operation: how to replace the bulb on the third central stop of a Jeep Patriot. Working even with the trunk cl
How to remove the gear knob on Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) We replace the gear knob on our Jeep Patriot. Let's see in this video how to perform the disassembly: First we remove the frame of the leather cap wi

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos