Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : Replacement of the front speakers of the Jeep Wrangler

Jeep Wrangler - Video tutorial

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Loudspeaker
Operation: Replacement of the front speakers of the Jeep Wrangler

Let's briefly see the instructions that will allow us to disassemble and replace the front speakers of the Jeep Wrangler, in simple steps. First, we open the front door on the driver's side and start to disassemble the plastic cover found at the bottom of the dashboard; we find our speaker on the back, where we will unscrew the screws and disconnect its electrical connector to remove it, as shown in the video. At this point, we replace and install the new front speaker, of the correct type, making the connection; finally, we reassemble the plastic grille!


Posted on 13 May 2024 by ScegliAuto



How to replace speakers on Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) We want to remove the speakers in the dashboard of the Jeep Wrangler? Let's see how they disassemble from inside the dashboard. We disconnect the bat
How to disassemble the crates in the door of a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Remove the crates in the Jeep door? We see the disassembly in the door panel of the Wrangler. We open the car door, identify where we need to remove
Seat replacement on Jeep Wrangler
Jeep Wrangler (1997-2007 / MK 2, TJ) Replacing the front seat of a Jeep Wrangler? We lift the front seat of the Wrangler to access under it and disassemble it. We move the seat forward,

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos