Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kawasaki
    3. : J300 : Resetting the oil service light on a Kawasaki J300.

Model: Kawasaki J300
Part: Checks and maintenance
Resetting the oil service light on a Kawasaki J300.

After performing the engine oil change on our Kawasaki J300, an operation that should be done every 5000km, we also need to reset the service light. In today's tutorial, we will show you how to do this in a few simple steps. First, we turn on the vehicle's ignition without starting the engine. Then, we press the "ADJ" button until the display shows the service interval in kilometers. Next, we press and hold the "RESET" button until the kilometers are reset and the service light disappears.


Posted on 18 September 2023 by ScegliAuto



Resetting the oil service light on a Kawasaki J300.
J300 After performing the engine oil change on our Kawasaki J300, an operation that should be done every 5000km, we also need to reset the service light.
Resetting the service light on the Kawasaki Z900.
Z900 Soon we will see the instructions that will allow us to carry out the routine maintenance and reset the service light of the Kawasaki Z900 motorcycle
How to reset the service light on the Kawasaki J300
(Various brands) Various After replacing the engine oil on this model of scooter, we must proceed to reset the warning light on the dashboard on. To do this we find the indic

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos