Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Keeway
    3. : Logik 125 : How to change engine oil on a Keeway Logik 125

Model: Keeway Logik 125
Part: Engine oil
How to change engine oil on a Keeway Logik 125

How to change engine oil on a Keeway Logik? Let's see in this video guide how to proceed with maintenance. We place the scooter on the stand, with a socket wrench we unscrew the pin of the oil pan (we drain the liquid in a container positioned below). Unscrew the tightening screws of the container cap where the oil filter is located and mount a new one (if it needs to be changed). Finally, top up the engine with the new oil sent by the manufacturer (as reported in the booklet). We check the oil level with the dipstick connected to the cap (if available).


Posted on 13 November 2023 by ScegliAuto

This video is currently unavailable


How to change engine oil on a Keeway Logik 125
Logik 125 How to change engine oil on a Keeway Logik? Let's see in this video guide how to proceed with maintenance. We place the scooter on the stand, with a
How do I change the engine oil of the Keeway K-Blade 125?
K Blade 125 The engine oil change on the Keeway K-Blade 125 is carried out by unscrewing the oil drain plug which is positioned in the lower central part of the
How to change the engine oil on the Keeway KBlade 125
Kblade 125 In today's video tutorial we will see how to change the oil, carrying out the regular routine maintenance service, on a Keeway KBlade 125 scooter. Fi

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos