Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Keeway
    3. : V250 Fi : How do you replace the exhaust pipe of the Keeway V250 Fi?

Model: Keeway V250 Fi
Part: Muffler
How do you replace the exhaust pipe of the Keeway V250 Fi?

In order to replace the exhaust muffler of the Keeway V250 Fi, you need to loosen the screws that hold the exhaust terminal to its housing on the right side of the motorcycle. Here, it will be possible to loosen the screws that hold the muffler to its seat, so that it is then possible to widen the ring that connects the muffler to the exhaust manifold. Once the old muffler has been removed from its seat, it will be possible to insert the new one: this must be fixed with the appropriate bolts to its supports, connected to the manifold in order to verify that everything is working correctly.


Posted on 1 January 2024 by ScegliAuto



How do you replace the exhaust pipe of the Keeway V250 Fi?
V250 Fi In order to replace the exhaust muffler of the Keeway V250 Fi, you need to loosen the screws that hold the exhaust terminal to its housing on the rig
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 The exhaust pipe of the Keeway RKF 125 can be replaced by loosening the screws that fix it at the lower support, near the crank and at the rear fende
How do you replace the exhaust pipe of the Keeway K-Light 125?
K Light 125 In order to replace the exhaust pipe of the Keeway K-Light 125, you need to loosen the screws that secure the exhaust terminal to its housing, locate

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos