Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Kia
  4. :
  5. Cee D
  6. : How do you remove the front bumper of the Kia Cee'd?

Kia Cee D - Video tutorial

Model: Kia Cee D MK 1 - Years 2006-2012
Part: Front bumper
Operation: How do you remove the front bumper of the Kia Cee'd?

To remove the front bumper of the Kia Cee'd, you need to open the hood so that you can loosen all the screws that attach the bumper from its upper part. Once these screws have been loosened, it will be possible to loosen those that are inside the front wheel arches. At this point, the last screws to be removed will be located in the central lower part, and once these have been loosened, it will be possible to detach the bumper by disconnecting its connectors inside. This way, it will be possible to properly connect and fix the new replacement part.


Posted on 22 June 2023 by ScegliAuto



Remove front bumper Kia Cee D
Kia Cee D (2012-2018 / JD, MK 2) We remove the front bumper of the Kia Cee D and then replace it with a new one of the same size. We lift the car with a lifting jack, unscrew the tig
Removing the headlight of a Kia Cee d
Kia Cee D (2006-2012 / MK 1) Damaged bulbs on a Kia Cee d? Let's see the disassembly of the front light. We raise the front hood, pulling the lever located at the bottom right of
How to replace the front headlight of the Kia Cee'd.
Kia Cee D (2012-2018 / JD, MK 2) The process of disassembling and replacing the front headlight and its bulbs of the Kia Cee’d is really simple and only takes a few minutes. First, w

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos